Audi S1 8X Competition Spec Intercooler

Click photos to enlarge them!

Audi S1 8X Competition Spec Intercooler

Audi S1 Competition Spec BIG POWER Rated Hand-Made Intercooler Kit

The development for the Pro Alloy Audi S1 intercooler began with an enquiry from a customer who needed a high performance upgrade, without the need for making big irreversible changes to his car. The current availability of aftermarket intercoolers was limited to inefficient core types and designs, some requiring major modification to install. We took the opportunity to develop a user friendly kit that bolts on in place of the original bumper bar, and requiring only a tiny amount of plastic trimming to the front panel and inside front lower edge of the bumper which is unseen.

The Pro Alloy S1 kit is sold as competition specification, not road spec due to the bumper bar change. The only further recommendation is to use the RS Style honeycomb grille for greater airflow. The kit bolts on to original mounting fixtures, and even the towing eye feature is retained. The intercooler core is a well proven tube and fin design, lightweight and far more efficient than bar and plate types which will struggle with heat soak and recovery inlet temps. This core is regularly used for power levels of 500bhp.

The key to the new intercoolers performance is the increase in core surface area, generating low inlet temps where other offerings struggle to make big improvements. We have achieved a growth in core surface area of 113% over standard, plus we have added 40% of internal volume to cope with increased boost demands. The intercoolers are finished in satin black or silver powder coat finish, with or without the “PRO” logo.


4WD Rolling Road Data Supplied by Circuit Motorsport


Original Intercooler showing 45 degrees above ambient, COMPETITION COOLER showing 5 degress above ambient on a 1/4 mile drag race


When dyno'd Circuit Motorsport ambient temprature was 13 degrees, our cooler never exceeded 30 degrees on any pull!


Please Select which finish you desire

If you require a core logo, Please state in the 'Notes' section which colour you would like.

What you will receive:

Competition Spec Intercooler Unit

Hose Link pipe for Headlight Washer Jet

2x Re-Mount Brackets

2x small cable ties

2x accompanying bolts


Item PRO LOGO Tick To Buy Price
Audi S1 8X Competition Spec Intercooler - Satin Black £799.00
Audi S1 8X Competition Spec Intercooler - Satin Silver £799.00